Towel Rail + Shelf

Step-by-Step Guide to Assembling a Black Pipe Towel Rail + Shelf

Tools and Materials Needed

  • Black pipe kitset for the towel rail (pipes, elbows, flanges, screws, etc.)
  • Timber shelf
  • Electric drill or screwdriver
  • Wall anchors (if necessary)
  • Measuring tape
  • Spirit level
  • Pencil

Step 1: Lay Out the Kitset Parts

  • Unbox the kit: Carefully remove all parts from the packaging.
  • Check components: Lay out the black pipes, fittings, flanges, screws, and brackets.
  • Verify parts: Ensure that all required pieces are present as per the instruction manual. Typical parts include:
    • Straight black pipes
    • Side Outlet Elbows (to connect corners)
    • Flanges (for mounting)
    • Screws

Step 2: Assemble the Pipe Rail

  • Connect the pipes: Begin by attaching the 70mm and 80mm pipes to the side outlet elbows and flanges. Note the 70mm goes to the shelf, while the 80mm goes to the wall. Tighten until most of the thread is hidden by the fitting and parts are tight. Not connect the long pipe to join the two side outlet elbows together.
  • Check alignment: Ensure the towel rail is level and adjust if necessary.

Step 3: Measure the Placement on the Wall

  • Decide the position: Choose where the towel rail will be mounted.
  • Mark anchor points: Use the measuring tape and pencil to mark the locations for the flanges on the wall. Make sure the rail will be level.
  • Check spacing: Measure the distance between flange centers to match the pipe lengths.

Step 4: Attach the Flanges to the Wall

  • Drill holes: Use a drill to create a hole at one of the the marked spots for the flanges. If mounting on plaster consider wall anchors to support the weight.
  • Screw in the flanges: Using the screws provided, secure the flanges to the wall. Ensure they are tightly in place.
  • Once attached: Repeat the process with each screw hole.

Step 5: Attach the shelf

  • Measure and attach: center the shelf on the flanges and use a drill to put the 20mm screws into the timber.

Step 6: Clean and Finish

  • Wipe down: Clean the rail using a dry cloth to remove any dust or fingerprints.
  • Inspect the installation: Make sure everything looks even and properly aligned.

Step 7: Extend Your Warranty Online

  • Visit the manufacturer’s website: Go to the designated website for warranty registration.
  • Fill in the form: Enter the required information, such as purchase date, product details, and personal information.
  • Submit and save confirmation: Once registered, keep a copy of the confirmation for future reference.

Warranty Information

2-Year Manufacturer's Warranty

We stand behind the quality of our products. Every purchase comes with a comprehensive 2-year manufacturer's warranty, ensuring your peace of mind. You can extend this by a further two years by registering your product purchase with us online.

Warranty Coverage:

  • Protection against manufacturing defects and workmanship issues
  • Repair or replacement of faulty parts or products

What's Not Covered:

  • Normal wear and tear
  • Accidental damage, misuse, or improper care
  • Unauthorized modifications or repairs

How to Claim:

  • Contact our customer support team with proof of purchase: warranty@ironmoa.co.nz
  • We'll guide you through the claim process and arrange for the necessary repairs or replacements
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.