Toilet Roll Stand

Step-by-Step Guide to Assembling a Toilet Roll Stand

Tools and Materials Needed

  • Black pipe kitset for the towel roll stand (pipes, elbows, end cap, 5 way cross, etc.)
  • Electric drill or screwdriver
  • Wall anchors (if necessary)
  • Measuring tape
  • Spirit level
  • Pencil

Step 1: Lay Out the Kitset Parts

  • Unbox the kit: Carefully remove all parts from the packaging.
  • Check components: Lay out the black pipes, fittings, elbows, and end cap.
  • Verify parts: Ensure that all required pieces are present as per the instruction manual. Typical parts include:
    • Straight black pipes (for the stand and the base)
    • Elbows (to connect corners)
    • End Cap
    • 5 Way Cross

Step 2: Assemble the Base

  • Take one of the five-way crosses to start building the base.
  • Insert four short pipes into the horizontal outlets of the cross, creating the legs of the stand. Attach an elbow to the end of each short pipe, which will act as feet and stabilize the stand.

Step 3: Build the Vertical Stand

  • Insert the long pipe vertically into the remaining center outlet of the base's five-way cross.
  • Make sure it is securely fitted so that it stands firmly upright.

Step 4. Finish the Toilet Roll Holder Arm:

  • Attach the end cap to the end of the horizontal arm (the short pipe with the elbow) to prevent the toilet paper roll from sliding off.

Step 5: Clean and Finish

  • Wipe down: Clean the rail using a dry cloth to remove any dust or fingerprints.
  • Inspect the installation: Make sure everything looks even and properly aligned.

Step 6: Extend Your Warranty Online

  • Visit the manufacturer’s website: Go to the designated website for warranty registration.
  • Fill in the form: Enter the required information, such as purchase date, product details, and personal information.
  • Submit and save confirmation: Once registered, keep a copy of the confirmation for future reference.

 

Warranty Information

2-Year Manufacturer's Warranty

We stand behind the quality of our products. Every purchase comes with a comprehensive 2-year manufacturer's warranty, ensuring your peace of mind. You can extend this by a further two years by registering your product purchase with us online.

Warranty Coverage:

  • Protection against manufacturing defects and workmanship issues
  • Repair or replacement of faulty parts or products

What's Not Covered:

  • Normal wear and tear
  • Accidental damage, misuse, or improper care
  • Unauthorized modifications or repairs

How to Claim:

  • Contact our customer support team with proof of purchase: warranty@ironmoa.co.nz
  • We'll guide you through the claim process and arrange for the necessary repairs or replacements
Back to blog