Toilet Roll Holder + Shelf

Toilet Roll Holder + Shelf

Step-by-Step Guide to Assembling a

Tools and Materials Needed

  • Black pipe kitset for the toilet roll + Shelf (timber, pipes,flange, screws, etc.)
  • Electric drill or screwdriver
  • Wall anchors (if necessary)
  • Measuring tape
  • Spirit level
  • Pencil

Step 1: Lay Out the Kitset Parts

  • Unbox the kit: Carefully remove all parts from the packaging.
  • Check components: Lay out the timber, black pipes,flanges, end cap, and screws.
  • Verify parts: Ensure that all required pieces are present as per the instruction manual. Typical parts include:
    • Straight black pipes (for the rail)
    • Timber (for the shelf)
    • Flanges (for mounting)
    • Screws
    • End cap

Step 2: Prepare the Timber Shelf

  • Attach the flanges to the timber for the vertical supports:
  • Position two 3-hole flanges on the underside of the timber at the marks where the vertical support pipes (80mm) will be attached. Ensure they are evenly spaced and aligned.
  • Drill pilot holes for the screws, then use the 20mm screws to secure the flanges to the timber.

Step 3: Assemble the shelf support structure:

  • Screw the 80mm pipes into the flanges you just attached to the timber. These will act as the vertical supports.
  • At the bottom of each of these 80mm pipes, screw another 3-hole flange to each pipe.

Step 4: Attach the shelf to the wall:

  • Position the timber shelf on the wall where you want it mounted. Use a pencil to mark where the two lower flanges will attach to the wall.
  • Drill pilot holes in the wall where the flanges will be mounted, using wall anchors if needed.
  • Use the 40mm screws to attach the flanges and secure the entire structure to the wall.

Step 5: Install the towel rail:

  • Attach the 70mm pipes to the underside of the timber on both sides (beneath the shelf) using the remaining two flanges. These pipes will act as support arms for the towel rail.
  • Screw the 625mm pipe into the openings of the two 70mm pipes, forming the towel rail.

Step 6: Final Adjustments:

  • Ensure all parts are tightly screwed in and the structure is secure.
  • Use a level to check that both the shelf and towel rail are perfectly horizontal.
  • Test the towel rail by hanging a towel to ensure it holds well and the shelf is stable.

Step 7: Clean and Finish

  • Wipe down: Clean the rail using a dry cloth to remove any dust or fingerprints.
  • Inspect the installation: Make sure everything looks even and properly aligned.

Step 8: Extend Your Warranty Online

  • Visit the manufacturer’s website: Go to the designated website for warranty registration.
  • Fill in the form: Enter the required information, such as purchase date, product details, and personal information.
  • Submit and save confirmation: Once registered, keep a copy of the confirmation for future reference.

Warranty Information

2-Year Manufacturer's Warranty

We stand behind the quality of our products. Every purchase comes with a comprehensive 2-year manufacturer's warranty, ensuring your peace of mind. You can extend this by a further two years by registering your product purchase with us online.

Warranty Coverage:

  • Protection against manufacturing defects and workmanship issues
  • Repair or replacement of faulty parts or products

What's Not Covered:

  • Normal wear and tear
  • Accidental damage, misuse, or improper care
  • Unauthorized modifications or repairs

How to Claim:

  • Contact our customer support team with proof of purchase: warranty@ironmoa.co.nz
  • We'll guide you through the claim process and arrange for the necessary repairs or replacements
Back to blog