Step-by-Step Guide to Assembling a
Tools and Materials Needed
- Black pipe kitset for the towel rail (pipes, elbows, flanges, screws, etc.)
- Electric drill or screwdriver
- Wall anchors (if necessary)
- Measuring tape
- Spirit level
- Pencil
Step 1: Lay Out the Kitset Parts
- Unbox the kit: Carefully remove all parts from the packaging.
- Check components: Lay out the black pipes, fittings, flanges, screws, and brackets.
-
Verify parts: Ensure that all required pieces are present as per the instruction manual. Typical parts include:
- Straight black pipes (for the rail)
- Elbows (to connect corners)
- Flanges (for mounting)
- Screws
Step 2: Assemble the Pipe Rail
- Connect the pipes: Begin by attaching the straight pipes to the elbows and flanges. Tighten until most of the thread is hidden by the fitting and parts are tight.
- Check alignment: Ensure the towel rail is level and adjust if necessary.
Step 3: Measure the Placement on the Wall
- Decide the position: Choose where the towel rail will be mounted.
- Mark anchor points: Use the measuring tape and pencil to mark the locations for the flanges on the wall. Make sure the rail will be level.
- Check spacing: Measure the distance between flange centers to match the pipe lengths.
Step 4: Attach the Flanges to the Wall
- Drill holes: Use a drill to create a hole at one of the the marked spots for the flanges. If mounting on plaster consider wall anchors to support the weight.
- Screw in the flanges: Using the screws provided, secure the flanges to the wall. Ensure they are tightly in place.
- Once attached: Repeat the process with each screw hole.
Step 5: Clean and Finish
- Wipe down: Clean the rail using a dry cloth to remove any dust or fingerprints.
- Inspect the installation: Make sure everything looks even and properly aligned.
Step 6: Extend Your Warranty Online
- Visit the manufacturer’s website: Go to the designated website for warranty registration.
- Fill in the form: Enter the required information, such as purchase date, product details, and personal information.
- Submit and save confirmation: Once registered, keep a copy of the confirmation for future reference.
Warranty Information
2-Year Manufacturer's Warranty
We stand behind the quality of our products. Every purchase comes with a comprehensive 2-year manufacturer's warranty, ensuring your peace of mind. You can extend this by a further two years by registering your product purchase with us online.
Warranty Coverage:
- Protection against manufacturing defects and workmanship issues
- Repair or replacement of faulty parts or products
What's Not Covered:
- Normal wear and tear
- Accidental damage, misuse, or improper care
- Unauthorized modifications or repairs
How to Claim:
- Contact our customer support team with proof of purchase: warranty@ironmoa.co.nz
- We'll guide you through the claim process and arrange for the necessary repairs or replacements