L Support Rail
Step-by-Step Guide to Assembling a
Tools and Materials Needed
- Black pipe kitset for the L Shape Support Rail (pipes, elbows, flanges, screws, etc.)
- Electric drill or screwdriver
- Wall anchors (if necessary)
- Measuring tape
- Spirit level
- Pencil
Step 1: Lay Out the Kitset Parts
- Unbox the kit: Carefully remove all parts from the packaging.
- Check components: Lay out the black pipes, fittings, flanges, screws, and elbows.
- Verify parts: Ensure that all required pieces are present as per the instruction manual. Typical parts include:
- Straight black pipes (for the rail)
- Elbows (to connect corners)
- Side Outlet Elbows
- Flanges (for mounting)
- Screws
- 3-hole flanges: (for attaching the pipes to the wall)
Step 1. Prepare the Wall for Mounting:
- Decide where the L-shaped support bracket will go.
- Mark the positions for the 3 flanges that will anchor the structure to the wall: two on the vertical section and one on the horizontal section.
Step 2. Attach the First Flange for the Vertical Section:
- Take one 3-hole flange and attach it to the wall where the vertical pipe will start.
- Use a level to ensure proper alignment, then drill pilot holes for the screws.
- If you’re mounting into drywall, insert wall anchors.
- Secure the flange with 3 screws.
Step 3. Connect the Vertical Pipes:
- Take one of the long pipes and screw it into the flange you just mounted.
- Attach a short pipe to the top of the long pipe using one of the regular elbows. This will create the vertical section of the L-shaped bracket.
Step 4. Attach the Second Flange for Vertical Stability:
- About halfway up the vertical section, attach the second 3-hole flange.
- Use the same process: mark, drill, insert anchors if needed, and secure with 3 screws.
- The second flange will keep the vertical section stable and straight.
Step 5. Connect the Horizontal Section Using the Side Outlet Elbow:
- At the top of the vertical section, attach the side outlet elbow.
- One opening will connect to the top of the vertical pipe.
- The second opening will connect to the horizontal pipe.
- The third opening will remain unused unless you want to add another support later.
- Screw a long pipe horizontally into the side outlet of the elbow.
Step 6. Complete the Horizontal Section with a Short Pipe:
- Now, attach the second short pipe at the far end of the horizontal section using the remaining regular elbow.
- This elbow will give the structure its final L shape.
Step 7. Attach the Third Flange for Horizontal Support:
- Use the third flange to secure the far end of the horizontal pipe to the wall.
- Again, mark the position, drill pilot holes, insert anchors (if necessary), and screw the flange into place.
Step 6: Clean and Finish
- Wipe down: Clean the rail using a dry cloth to remove any dust or fingerprints.
- Inspect the installation: Make sure everything looks even and properly aligned.
Step 7: Extend Your Warranty Online
- Visit the manufacturer’s website: Go to the designated website for warranty registration.
- Fill in the form: Enter the required information, such as purchase date, product details, and personal information.
- Submit and save confirmation: Once registered, keep a copy of the confirmation for future reference.
Warranty Information
2-Year Manufacturer's Warranty
We stand behind the quality of our products. Every purchase comes with a comprehensive 2-year manufacturer's warranty, ensuring your peace of mind. You can extend this by a further two years by registering your product purchase with us online.
Warranty Coverage:
- Protection against manufacturing defects and workmanship issues
- Repair or replacement of faulty parts or products
What's Not Covered:
- Normal wear and tear
- Accidental damage, misuse, or improper care
- Unauthorized modifications or repairs
How to Claim:
- Contact our customer support team with proof of purchase: warranty@ironmoa.co.nz
- We'll guide you through the claim process and arrange for the necessary repairs or replacements